Shahaboddin Azimiyancheshmeh, Hamid Montazerolghaem

Abstract

The new idea for manufacturing collector 8 electronic collector 8 and to sharpen the edges of the electrode with enhancement speed to make easier for the operation of electrospinning in this field was done.

And it was done over the sharp edges of the collector to achieve the fibers which corresponds to the geometry of the collector to which the formation of fibers and by using the surveying and solving by computer and then we give it to the laser cutting instrument, the design will be done by careful cutting.

In these researches with using the sharp edges the fibers come to use and when the fibers much to the edge of the collector we should balance between them. With this method we produce more angles between fibers to culture and reserve cells , schematic solving was done to specify fiber distances between them and the situation of the cell culture the electrospinning with low restriction in this collector.